JVC KD-LX3R manual When Security Lock works?, To change the password, English

Page 40

When Security Lock works?

ENGLISH

When Security Lock works?

Once you register the password, “ ” appears on the display, and the unit will ask you to enter the password in the following cases:

•When you turn on the unit for the first time after re-installing the unit.

•When you turn on the unit for the first time after replacing the car battery – because it is completely used up.

To use this unit, you must enter the correct password by following the procedure below.

1Press DISP to select the character set you want.

2Press + or – to enter a character.

3Press ¢ or 4 to move the character entry position.

4Repeat steps 1 to 3 to enter the entire password (4 letters) correctly, then press SEL.

•If you enter the correct password, the security lock is canceled and you can use the unit normally.

•In the following cases, the security lock is not canceled (“NOT ACCEPT” appears on the display) then the unit turns off. (The unit will never turns on unless you press the reset button on the front panel. See page 3.)

–If you enter an incorrect password then press SEL.

–If you cannot finish entering the correct password within 30 seconds.

If you enter an incorrect character while entering the password

Press 4 to move back the character entry position over the incorrect character, then press + or – to select the correct character.

To change the password

If you want to change the password after you have registered it, follow the procedure below.

1Press + and ¢ at the same time for more than 2 seconds.

“ ” appears on the display.

2Enter the current password correctly, then press SEL. The unit enters password entry mode.

3Enter a new password as you want, then press SEL.

The password flashes on the display for a while, then the unit returns to the normal operation mode.

• See page 38 for details on how to enter the password.

40

Image 40

Contents KD-LX3R INSTRUCTIONSCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERCAUTION on Volume Setting PrecautionsFor safety ENGLISHTo reset the unit CONTENTSENGLISH How to use the number buttons ENGLISHTurn on the power Adjust the volumeAdjust the sound as you want see pages BASIC OPERATIONSRADIO OPERATIONS Listening to the radioSelect the band Start searching a stationTune into a station you want while “M” is flashingWhen an FM stereo broadcast is hard to receive Select the bandStoring stations in memory Select the FM bandFM station automatic preset SSM ENGLISHSelect the FM1 band Tune into a station of 88.3 MHzManual preset ENGLISHTuning into a preset station Select the bandENGLISH FM1 FM2 FM3 AMRDS OPERATIONS What you can do with RDS EONENGLISH Mode 1 Mode 2 ModeENGLISH Mode 1 AF on / REG offMode 2 AF on / REG on Mode 3 AF off / REG offUsing Standby Reception TA Standby ReceptionHow TA Standby Reception works ENGLISHENGLISH PTY Standby ReceptionHow PTY Standby Reception works Searching your favorite programme PTY Search Finish the setting Other convenient RDS functions and adjustments PTY codes Automatic clock adjustmentENGLISH CD OPERATIONS Playing a CDOpen the loading slot Insert a disc into the loading slotPlaying a CD Text Select text display mode while playing a CD TextENGLISH Disc Title / Performer Track TitleLocating a track or a particular portion on a CD To fast-forwardor reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlySelecting CD playback modes To play back tracks at random Random PlayTo play back tracks repeatedly Repeat Play ENGLISHTo play back only intros Intro Scan Prohibiting CD ejectionENGLISH SOUND ADJUSTMENTS Adjusting the soundSelect the item you want to adjust Adjust the levelWhat is BBE? ENGLISHUnder license from BBE Sound, Inc is a trademark of BBE Sound, IncSelecting preset sound modes Light “MODE” on the lower part of the displaySelect the sound control mode SCM you want Preset valuesStoring your own sound adjustments Adjust the selected itemRepeat steps 3 and 4 to adjust other items Press and hold SOUNDSetting the clock OTHER MAIN FUNCTIONSControlling the volume automatically Audio Cruise Select desired settingSelect “CRUISE MODE.” Finish the settingTo adjust the volume increase rate ENGLISHIf Audio Cruise does not function correctly If this happens, see the NOTICE aboveChanging the general settings PSM Select the PSM item you want to adjust. See pageAdjust the PSM item selected above Finish the settingAUTO ADJUST TA VOLUMEBEEP SWITCH P. AMP SWITCHTo select the clock display To select the level meterTo select the dimmer mode To select the telephone mutingTo turn on/off the power amplifier switch To adjust the display contrast levelTo turn on/off the key-touchtone To select the scroll modeAssigning names to the sources Select a source you want to assign a name toENGLISH SourcesSelect a character ?@ ` Space Using the security lock Select the character set you want to useRegistering the password ENGLISHSelect a letter Move the character entry position to the nextFinish the setting How to Use the Provided CODE StickerTo change the password When Security Lock works?ENGLISH Installing the battery REMOTE OPERATIONSBefore using the remote controller 1.Remove the battery caseUsing the remote controller ENGLISHCD CHANGER OPERATIONS Playing CDsSelect the CD automatic changer ENGLISHTo fast-forwardor reverse the track To go to the next tracks or the previous tracksTo go to a particular disc directly To show the CD Text informationCanceled CanceledRND Indicator RPT IndicatorINTRO 1 INTRO Canceled To play back only intros Intro ScanENGLISH ModeUsing a subwoofer EXTERNAL COMPONENT OPERATIONSPlaying an external component Select the external componentTuning into an ensemble and one of the services DAB TUNER OPERATIONSSelect the DAB tuner Select the DAB band DAB1, DAB2, or DAB3Select a service you want to listen to Start searching an ensembleService name Ensemble name Frequency ENGLISHStoring DAB services in memory Select a service of the ensemble you wantTune into an ensemble you want to store Select the DAB tunerto store the selected service into for more Press and hold the number button you wantthan 2 seconds ENGLISHTuning into a preset DAB service MAINTENANCE Handling CDsHow to handle CDs To keep CDs cleanTROUBLESHOOTING SymptomsENGLISH CausesSPECIFICATIONS ENGLISHFM Tuner MW Tuner0399MNMMDWOZK EN, GE, FR, NLVICTOR COMPANY OF JAPAN, LIMITED

Related manuals

Manual 56 pages 54.7 Kb