Assembly
6585 88
72
34
3
Figure 6
9
88
72
69
Figure 7
6.Insert the Pulse Wires (88) into the large hole at the front of the Console Tube (3) and pull the wires through the hole at the top of the tube. Secure the Pulse Handlebar (85) to the Console Tube (3) using four Arc Washers (34) and four Hex Head Bolts (65).
7.Connect the Sensor Wire (72) and the Pulse Wires (88) to the Console (9). Then attach the Console (9) to the top of the Console Tube (3) and secure it in place using four Screws (69).
Note: The four Screws (69) will already be installed into the back of the Console (9) when you remove it from the box.
Congratulations!
You have completed the assembly of your new Triumph 5.3e Elliptical.
10