Assembly
5053
47
48
49
4a
Figure 4
3
34
65
72
73
3. Attach the Left Pedal (5a) to Left Pedal Tube (4a) and secure in place
Figure 3with two Hex Head Bolts (47), two Nylock Nuts (49), and two Washers (48). Next, insert the Left Pedal Tube (4a) into the U Bracket (53) and use Hex Head Bolt (50), Washer (48), and Nylock Nut (49). Repeat previous directions to complete the right side.
5a
4. Connect the Extension Wire (72) to Sensor Wire (73). Next, connect the Tension Cable (68) to the Tension Knob (66). (Refer to Figure 4a on the next page) Slide the Console Tube (3) onto the Main Frame (1) and secure in place using four Washers (34) and four Hex Head Bolt (65).
34
65
66
68
8