Campers Want to Know

ASSEMBLY INSTRUCTIONS

THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.

*Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent.

*Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the next section before flexing the pole during set-up.

*Do not drop tent pole bag. Do not bounce tent bag on its end to remove tent, as these actions may damage the shock-cording and/or pole ends.

STEP 1: Verify Package Content

Verify package content by emptying contents of bag(s) and confirming all parts are included and undamaged. Do this at home before you leave on your trip.

STEP 2: Set Up the Tent

A)Select a smooth level site and spread out your tent.

B)Extend the tent poles and place in position ready for installation. Push each of the four tent poles through pole sleeves.

C)After sliding poles through sleeves, gently flex poles into an arch and insert ends onto pin-rings at tent base.

D)Snap Quick Clips (attached to tent body) onto tent poles to shape tent.

STEP 3: Attach the Rainfly

A)Drape rainfly over tent (pole sleeve down).

B)Locate pole sleeve on underside of rainfly. Slide pole through sleeve.

C)Insert one end of rainfly pole into

grommet. Gently flex pole and insert opposite end diagonally into other grommet.

D)Attach the s-hooks to the pin-ring at the tent base.

Step 4: Stake Tent

A)Stake tent by driving stakes through the pin-rings at the base of tent.

Step 5: Adding Accessories

A)The gear loft is for extra storage of light weight items (i.e. maps, eyeglass- es). Attach its s-hooks to the fabric loops inside tent ceiling.

B)The cup holder is for small drinks.

S-hook easily secures to fabric loops located on inside ceiling of tent.

Should I use a seam sealer?

We highly recommend seam sealing your tent seams. Use a seam sealer compound (tube or bottle type) that applies directly to the stitching for best cover- age. Make sure compound is completely dry before rolling up your tent. Follow the manufacturer’s direc- tions.

DISASSEMBLY INSTRUCTIONS

*Make sure all window(s) and door(s) are unzipped prior to disassembly.

*Store all Poles and Stakes in their corresponding Bags to prevent any possible tearing or damage to the fabric piece(s).

STEP 1: Remove the Stakes

Carefully remove stakes by pulling out the hook ends. Tip: Do not pull or tug at the stake loops sewn onto the fabric body. Remove excess soil from the stakes and store them in their bag.

STEP 2: Take Down Gear Loft

Detach gear loft by unhooking gear loft s-hooks from fabric loops on ceiling. Fold gear loft for storage.

STEP 3: Remove Rainfly

A)Detach S-hooks and nylon fasteners that hold down rainfly.

B)Remove pole from grommet and slide out from pole sleeve.

C)Fold rainfly and pole for storage.

STEP 4: Take Down the Tent

A)Unfasten Quick Clips from tent poles.

B)Remove poles from pin-rings.

C)Slide poles out by carefully pushing them through the sleeves, away from the end at which you are standing.

D)Carefully fold poles and store them in their bag.

STEP 5: Fold the Tent

Fold tent into rectangular shape the width of pole bag. Lay pole bag at one end of tent and roll tightly together, slowly squeezing air out as you go. (You can roll rainfly together with tent in this step.) Store tent in carry bag provided. (Following these instructions will make it easi- er to fit tent into bag.)