Keys Fitness E2-0 owner manual Assembly for Pedal Joint Cover, Assembly for Console

www.keysfitness.com
Use Tool		J
	Use Tool
	13mm	D
	14mm
6mm		J1
ASSEMBLY FOR LEFT ROTATING HANDLEBAR		J
Attach the left rotating handlebar9(E2) to the left rotating handlebar tube (P2) and se-		D
cure using 4 allen screws (N3), 4 spring washers (N13) and 4 flat washers (N14).		E2
ASSEMBLY FOR PEDAL JOINT COVER
Step 1:		N3
		N13
Install left pedal joint cover (L-L) to conceal pedal arm connection and secure using
screw (N8).		N14
Step 2:	L-(L)	P2
Repeat step 1 on the right side with right pedal joint cover (L-R).
ASSEMBLY FOR CONSOLE		K2
Step 1:
	N10
Remove the screws (J1) from the back of the console.

K1

N5

Step 2:

Connect the pulse wires, sensor wires and the toggle wires with the corresponding wires on the console.

Step 4:

Gently slide the wires down the upright post and secure the console (J) to the upright post (D) using the screws (J1).

14 Assembly

ASSEMBLY FOR WATER BOTTLE HOLDER

Step 1:

Attach the water bottle holder (K2) and secure to the upright post (D) using 2 screws (N5).

Step 2:

Place water bottle (K1) inside water bottle holder (K2).