3 Attach Tent to Frame Using Frame Clips
the edges of tent to frame poles. (illus. 5), (illus. 6)
illus. 5
Frame clips
illus. 6
Assembled tent without rainfly.
Attach Rainfly
4
(illus. 7), (illus. 8)
Rainfly pocket
Pole attachments
illus. 7 Insert rainfly pole piece into pocket on underside of rainfly
illus. 8
Rainfly pockets
Underside of rainfly attaches to frame poles
“S” hooks attach to | Side |
rings at the corners | guyline |
illus. 9 Completed tent with rainfly.
Things You Should Know
•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be mini- mized by removing wet clothing from your tent and by providing good ventila- tion through the tent.
•Never store tent, even for a short period of time, without drying it thorough- ly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.
•STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE.
•TENT POLES SHOULD NOT BE LEFT TELESCOPED
TOGETHER DURING STORAGE.
•Seam sealer has not been provided with your tent. We recommend seam sealing your tent prior to camping. Seam sealer may be purchased through your local retailer or at your local sporting goods store.
•Do not leave your tent
•See owners manual for more tips.
WARNING: KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of
THE COLEMAN CO., INC.
3600 N. Hydraulic • Wichita, Kansas 67219
PRINTED IN CHINA REV. 7/03
MADE IN CHINA