Coleman 17'X9 owner manual Weathermaster

WEATHERMASTER™ 17'X9'

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, position the end of tent into the wind.

–See owners manual for more tips

Instructions apply to Part Number 9232D179

Chain shock-corded

POLE ASSEMBLY PARTS

Center Curved Roof Poles

(Red Sticker) Part No. 9232-302

End Curved Roof Poles

(Blue Sticker) Part No. 9232-303

Center Brace Poles

(Red Sticker) Part No. 9232B304

End Brace Poles

(Blue Sticker) Part No. 9232B305

Awning Poles

(Green Sticker) Part No. 9232-306

Rainfly Part No. 9232D307

1	Layout & Positioning of Tent
	–Layout and position tent with door	Roof sleeve
	facing desired direction. (illus. 1)

–Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the stakes
slightly toward the tent.
(illus. 2) Keep the floor taut.
–Unzip the door.	illus. 1

illus. 2 Stake loops properly staked

Front door

2 Assemble & Place Roof Poles

–Assemble all shock-corded roof poles. When assembled will form a continuous arch with both ends pointing down. (illus. 3)

–Select center roof poles with

red stickers and square ends. Then insert them through the two center roof sleeves. (illus. 4)

–Select end roof poles with

blue stickers and round ends. Then insert them through the roof sleeves at each end of the tent. (illus. 4)

Forms an arch

Shock corded poles

illus. 3 Curved roof pole assembly.

Pole sleeves

illus. 4 Curved roof pole system shown

inserted through pole sleeves. Square end, red

sticker poles go into two center pole sleeves. Round end,

blue sticker poles go into two end pole sleeves.