GAMMA | Adjust if the neutral color is bright |
| or dark |
|
|
BRIGHTNESS | Adjust if the picture is bright or |
| dark as a whole |
|
|
CONTRAST | Adjust if the far and near positions |
| are unnatural |
|
|
SATURATION | Adjust if the picture is whitish or |
| blackish |
|
|
TINT | Adjust if the human skin color is |
| unnatural |
|
|
SHARPNESS | Adjust if the picture is indistinct |
|
3Adjust the parameter.
4Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, while holding down SHIFT, press VFP again. The screen will automatically be erased after 9 seconds even if you do not press VFP.
Changing the Display Brightness | ONLY |
| Remote |
You can dim the display window. |
|
DIMMER ON |
|
DIMMER OFF |
|
(Normal) |
|
Setting the Clock Main Unit | INFO |
ONLY |
|
Without setting the
•To exit from the clock setting, press CLOCK/TIMER as required.
•To go back to the previous step, press CANCEL/DEMO.
1Activate clock setting mode.
CLOCK /TIMER
2Adjust the hour, then minute.
PRESET |
|
|
| SET |
|
/DISPLAY
Now the
To check the current time when the System is turned on
2sec.
SET |
|
/DISPLAY | Clock |
Source information
Turning Off the Power Automatically Remote
ONLY
With Sleep Timer, you can fall asleep listening to music.
1Specify the time (in minutes).
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
Canceled SLEEP 150 SLEEP 120 SLEEP 90
SLEEP |
2Wait until the set time goes off.
To check the time remaining until the
• If you press the button repeatedly, you can change the
•If you have already adjusted the clock before, press the button repeatedly until the clock time starts flashing.
16