~ AM/FM antenna | Ÿ Digital audio component |
To assemble the AM loop antenna
To connect AM/FM antenna |
|
AM loop antenna | Turn it until the best |
(supplied) | reception is obtained. |
FM antenna (supplied)
Extend it so that you can obtain the best reception.
For better AM/FM reception
AM loop antenna (supplied)
Keep it connected.
Extend it horizontally.
FM outdoor antenna (not supplied)
•Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.
Protective cap | OPTICAL |
| DIGITAL |
| OUTPUT |
•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” preference display correctly according to the connected digital audio equipment (see page 37). If setting is incorrect, loud noise may be generated causing damage to the speakers.
!TV/monitor
Red
Blue
Green
Component | S video cord | Composite video | |
video cord | |||
cord (supplied) | |||
(not supplied) | (not supplied) | ||
|
•To select progressive scanning mode, use COMPONENT jacks
•Connect the VIDEO jack,
When connecting the auxiliary equipment (AUX)
Red
Stereo audio cord (not supplied)
White
To set the video output selector
You can select the video output to match it to the color system of your TV.
NTSC: For an NTSC TV.
PAL: For a PAL TV.
For a
4