Eureka! Tents manual Assembly Instructions the Zeus Classic

ASSEMBLY INSTRUCTIONS THE ZEUS CLASSIC:

• Attach all the carabiners / clips to the poles and stake out

each corner web loop. See fig.6.

• Stake out the two vestibule webs and the side panel pull outs. Adjust tension. See fig.7.

DB

fig.6

D

fig.1

B

	fig.3
A	C
	fig.7
fig.2	fig.4
	NOTE:
	• To tear down, pull out stakes and un-hook the carabiners / clips.
	Collapse the poles and stow in the pole bag. Arrange the tent into a
fig.5	rectangle and fold the vestibule inward. Fold the rectangle into 1/2,
	lay the pole bag across the tent and roll up. Stow in carry bag.
	• To increase airflow into the tent body, roll down the low vent on the
	door flap and secure with Velcro® fasteners.
• Grasp the apex of both poles	• During high winds, tie a guy-out cord to each pole and its center
and raise them over the center
	carabiner. Stake out the cords, at 3-4 feet from the tent, in line with
of the fabric. See fig.4. Attach
	the direction the pole.
the middle carabiner to capture
both poles. See fig.5.

AC

www.eurekatent.com

1.800.572.8822

REV. C 4.09