3 Press one of the Disc button
The display will change to the Program Entry display.
CD1
1 CD
or
Disc number Track number
4 Select the track you want to program.
Using the Unit
While the display is blinking, press the 4or ¢button to select the track, then press the SET button within 10 seconds.
The program order number will be assigned from
PRESET
or
Disc number Track number
SET
Program order number
Using the Remote Control
Press the numeric keys to directly enter the track number. Then, the program order number will be assigned from
•To delete the current program step, press the CANCEL button on the Unit.
5 Repeat steps 3 and 4 to program other tracks on the same CD or the other CD.
6 To play the program, Press the CD 6but- ton.
For details, see “To Play the Program You Have Made” men- tioned below.
To confirm the program, while the CD player is stopped with the “PROG” indicator lit on the display, press the 4or ¢but- ton on the Remote Control.
To delete all the tracks in the program, while the CD Player
is stopped, press the 7button.
To Modify the Program, while the CD Player is stopped, press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above steps 3 and 4.
•If you try to program a track number that does not exists on the CD, your entry will be ignored.
•If you try to program the 33rd track, “FULL” appears on the display.
To Play the Program You Have Made
Press the CD 6button.
The System plays the tracks in the order you have programmed them.
•To use Repeat Play for Program Play, press the REPEAT but- ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks” on page 15.
❏You can skip to a particular program track by pressing the 4 or ¢button during Program Play.
❏To stop playing, press the 7button once. If you press the 7but-
ton, while the CD Player is stopped, the program is deleted.
Using the CD Player (Digital Audio CDs, MP3 Discs)
To Exit and Re-enter Program Play
The program you have made is stored in memory. So, you can exit Program Play temporarily or
To exit the program mode once, while the CD Player is stopped, press the PROGRAM button on the Unit or the PRO- GRAM/RANDOM button on the Remote Control to light off the “PRGM” indicator. By changing the source to the other (e.g. Tun- er), the CD Player also exits Program Play mode.
To
Random Play
The tracks of all the CDs will play in no special order when you use this mode.
•To use Repeat Play for Random Play, press the REPEAT but- ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks”mentioned below.
1 In Stop mode, set the CD Player in Random Play mode.
On the Unit
Press the RANDOM button to light the “RANDOM” indicator. At the same time, “RANDOM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the “RANDOM” appears on the display.
The “RANDOM” indicator also lights up on the display.
Each time you press the button, the display changes as follows: PROGRAM = RANDOM = Blank display (Normal Play) = (back to the beginning)
2 Press the CD 6button.
The tracks on all the CDs are played in random order. To stop playing, press the 7button.
To skip a track during playback, press the ¢ button to jump to the next track in the random sequence.
To exit Random Play mode, while the CD Player is stopped, press the RANDOM button on the Unit or the PROGRAM/RAN- DOM button on the Remote Control again to light off the “RAN- DOM” indicator. Normal Play resumes.
English
14