THE T-RAX SPORT
INSTALLATION MANUAL
Please READ and FOLLOW all instructions carefully.
FINALLY – A COMPANY THAT LOVES BIKES AS MUCH AS YOU DO.
Chances are, your bikes are just like ours - your most valued possessions. And if it has the Saris name on it, nothing we build goes out the door unless it’s worth putting those posses- sions on. Call it obsessive. Call it eccentric. We just chalk it up to caring a hell of a lot about creat- ing the last rack you’ll ever need.
Tongue Weight Limitations
Hitch Type | Tongue Weight | Maximum Load |
|
|
|
200 lbs. | 2 bikes/70 lbs. | |
| 200 lbs. | 3 bikes/105 lbs. |
| 300 lbs. | 4 bikes/140 lbs. |
|
|
|
2” | 300 lbs. | 2 bikes/70 lbs. |
| 300 lbs. | 3 bikes/105 lbs. |
| 300 lbs. | 4 bikes/140 lbs. |
|
|
|
*35lbs. per bike maximum
Parts List
| Item Description | QTY |
1 | 1 | |
2 | Receiver Base w/2” | 1 |
| adaptor |
|
|
|
|
3 | Pin with lanyard | 1 |
4 | Lock washer | 1 |
|
|
|
5 | Hitch pin bolt | 1 |
6 | Cotter pin | 1 |
|
|
|
7 | Sleeve | 1 |
1. MOUNT CARRIER TO VEHICLE
1A.
8 | 1/2” bolt | 1 |
9 | 1/2” washer | 1 |
|
|
|
10 | 1/2” nut | 1 |
|
|
|
11 | 3/8” bolt | 1 |
|
|
|
12 | 3/8” washer | 1 |
|
|
|
13 | 3/8” nut | 1 |
Tools Included: 4mm hex wrench
Tools Required: 3/4” (19mm) wrench x 2 9/16” wrench
Remove adaptor bolt with 4mm hex wrench provided.
Slide receiver into
For added security part #3022 sold separate- ly.
Slide 2” adaptor off receiver.
1B. 2” Receiver
Slide receiver into 2” hitch as illustrated. Install threaded hitch pin bolt and lock washer fully tighten using 3/4” (19mm) wrench. Install cotter pin.
For added security part #3022 sold sepa- rately.