ADJUST ARMS ON CARRIER:
10
Unhook clasp and pull pin from the rack.
11
Rotate arm up and out away from vehicle. Align holes and insert pin.
12
To secure arm, be sure that the clasp is closed.
MOUNT BIKES TO CARRIER:
Place bikes on carrier arms, alternat- ing direction of handle-bars. The pur- chase of Saris Protect-O-Pads(#2060) is recommended to protect contact areas. Make sure foam pads are free of debris as it could scratch vehicle's finish. Cover inner pedal of first bike to avoid potential scratching of vehicle finish.
Press yellow
button and
rotate/ slide
along tube
Rest cross tube in hold-down saddles. Note: To aid in positioning of bicycles, hold-downs can be slid along arm tube. Press the yellow button on stabilizer arm to move the stabilizer into position to fit snugly against bicycle down tube.
Note: Cable locks can be used to secure bikes to rack (#981 locking cable recommended)
