Emerson Process Management ES58 General Controls, Volume Adjustments, EQ Preset Equalizer Button

OPERATING INSTRUCTIONS

•Make sure that the FM Wire Antenna is fully extended.

•Make sure that the AM Loop Antenna is properly installed.

•Make sure that you have installed batteries in the remote control.

•Make sure that the AC power cord is connected to an outlet that is always “live”. Do not connect to an outlet that is controlled by a wall switch.

GENERAL CONTROLS

Volume Adjustments

Press the VOLUME + or – comtrol on the front panel or the buttons on the remote control to increase or decrease the volume. The volume level indicator appears in the main display. The range is from “00” (Minimum) to “30” (Maximum). The system remembers the volume level when the power is switched ‘Off’and returns to the same level when the power is switched ‘On’again.

P.EQ (Preset Equalizer) Button

This system has a 3-Band Preset Electronic Equalizer that allows you to adjust the tone output for the most popular types of music. The settings are “CLASSIC”, “ROCK”, “POP” or flat (EQ ‘Off’).

To change the EQ setting press the EQ button on the front panel or on the remote control until the desired setting appears in the main display. When no EQ indicator appears, the EQ is ‘Off’.

MUTE Button

To temporarily shut off the sound from the speakers press the MUTE button. The MUTE indicator will appear in the display and the sound will stop. Press the MUTE button again to cancel Mute and restore the sound. The MUTE indicator will disappear from the display.

12

ES58_012904.p65 12

29/1/2004, 15:24