Omron Healthcare HR-100C instruction manual Using Stopwatch Feature, Attaching the Transmitter

Page 11

USING THE

STOPWATCH FEATURE

1. Press the MODE button to select the Stopwatch operating mode.

2.Press the ST/SP button to start the stopwatch.

3.Press the ST/SP button to stop the stopwatch.

4.Press and hold the SET button to reset the stopwatch.

THE TRANSMITTER

The transmitter counts your heartbeat and sends the data to the receiver.

ATTACHING THE TRANSMITTER

Attach the strap to the transmitter by inserting the strap clip through the backside of the corresponding shaped hole on the transmitter. Gently push down to secure.

1.Moisten the conductive pads on the backside of the transmitter with water or a conductive gel to ensure a solid contact.

CONDUCTIVE PADS

2.Strap the transmitter across your chest. Adjust the strap until the transmitter sits snugly below your pectoral muscles for an accurate heart rate signal.

11

Image 11
Contents Heart Rate Monitor Model HR-100C Table of Contents Staple your purchase receipt here IntroductionComponents Maximum Heart Rate Your Personal DataTraining Zones Personal DataUSE in the Water Selecting Operating ModeControl Buttons Setting the Time Date Basic Setting InstructionsDisplaying the Date Setting the AlarmActivating the Alarm Setting the Heart Rate Alert Setting Heart Rate LimitsUsing the Backlight Feature Setting the Heart Rate LimitsAttaching the Transmitter Using Stopwatch FeatureTransmitter Effective Range TroubleshootingReceiver Water ResistanceCaring for Your Monitor Battery InstallationSpecifications Limited Warranties Warranty InformationDistributed by