JVC MX-GT70 Connecting Other Equipment, Canceling the display demonstration, On the unit only

Page 11

1Open the speaker terminals on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the polarity (colors) of the speaker terminals: Red

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

(+)to red (+) and black (–) to black (–); Blue (+) to blue

(+)and black (–) to black (–).

3Close the speaker terminals.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

Connecting Other Equipment

CD OPTICAL

DIGITAL OUTPUT

Protective plug

Before connecting the other equipment, remove the protective plug from the terminal.

You can connect both analog and digital equipment.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

Audio equipment with an optical digital input

To optical digital input

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the CD OPTICAL DIGITAL OUTPUT terminal.

To connect an analog component

Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.

Audio equipment

To audio output

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).

Now, you can plug the AC power cord.

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.

Canceling the display demonstration

On the unit ONLY:

To cancel the display demonstration, press

CANCEL/DEMO until “DEMO OFF” appears on the display.

When you press other buttons

The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it by pressing CANCEL/DEMO.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for more than 1 second.

– 8 –

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MX-G70 Mises en garde, précautions et indications diverses Instructions for safe use About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Front Panel0Disc tray open/close CD1, CD2, and CD3 buttons 13, 14 Display WindowSee pages in the parentheses for details AUX button and lampCD 3´8button 9, 14 Remote ControlRemote Control Disc number buttons CD1, CD2, and CD3 14FM antenna Supplied Accessories Connecting AntennasPutting the Batteries into the Remote Control Getting StartedTo connect an outdoor AM antenna Connecting SpeakersTurn the AM loop antenna until you have the best reception AM antennaOn the unit only Connecting Other EquipmentCanceling the display demonstration Close the speaker terminalsSelecting the Sources Turning On or Off the PowerSetting the Clock Common OperationsSelecting the Sound Modes Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTo use your own sound mode Creating Your Own Sound Mode Manual ModeOn the unit only Select one of the preset sound modes Listening to FM and AM Broadcasts Tuning in a StationPresetting Stations Tuning in a Preset StationRepeat steps 1 to 3 to place other CDs Playing Back CDs CD/CD-R/CD-RWLoading CDs Press the same 0 you have pressed in stepBasic CD Operations Playing Back the Entire Discs Continuous PlayProgram Play To exit from Random play mode, press Random again Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray LockLocating the Beginning of a Song Music Scan Playing Back TapesPlaying Back a Tape To protect your recording To clean the heads, capstans, and pinch rollersRecording Recording a Tape on Deck BPress Dubbing To record on both sides Reverse ModeDubbing Tapes CD Direct RecordingAuto Edit Recording How Daily Timer actually works Using the TimersUsing Daily Timer Press CLOCK/TIMER againPress SET/DISPLAY to complete the Daily Timer setting When selecting Tuner FM or Tuner AMWhen selecting CD Turn 4/ ¢to set the volume levelUnit enters preset station selecting mode Using Recording TimerSelect the preset station How Recording Timer actually worksWait for about 5 seconds after specifying the time length Using Sleep TimerTimer Priority On the remote control only Press SleepHandling discs MaintenanceCleaning the unit To clean the discSymptom TroubleshootingSpecifications Speaker section SP-MXG70 MX-G70Amplifier section CA-MXG70 HOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 0101MWMMDWJEM

MX-GT70 specifications

The JVC MX-GT70 is a powerful and versatile audio system that stands out for its impressive features and modern technologies, making it a top choice for music enthusiasts. This speaker system, which combines functionality with an eye-catching design, offers a unique blend of performance and style.

One of the main features of the JVC MX-GT70 is its high-performance speakers. The system is designed to deliver robust audio quality, with exceptional clarity and depth. Boasting an impressive output power, it can fill a room with sound, making it ideal for parties and gatherings. The system effectively reproduces a wide range of frequencies, ensuring that bass sounds are deep and powerful while highs are crisp and clear.

The MX-GT70 also incorporates advanced audio technologies, including JVC's proprietary Dynamic Bass Boost. This feature enhances low frequencies, providing an extra layer of punch to your music. Whether you are listening to hip-hop, electronic, or any genre that benefits from bass, the Dynamic Bass Boost ensures that you feel the rhythm. Additionally, the system supports various audio formats, including MP3 and WMA, allowing you to enjoy your favorite tracks in multiple ways.

Connectivity is another strong suit of the JVC MX-GT70. It offers multiple input options, including USB, AUX, and Bluetooth, facilitating seamless integration with various devices. Bluetooth connectivity gives users the flexibility to play music wirelessly from smartphones, tablets, and laptops, promoting convenience without compromising sound quality.

The JVC MX-GT70 also features an intuitive control panel, making navigation through tracks and settings straightforward. The LCD display provides clear information on the current track, volume levels, and system settings, enhancing user experience.

Moreover, the design of the MX-GT70 is aesthetically pleasing, with a modern yet robust look that ensures it fits well in any environment. Its compact size allows for easy placement, while the build quality ensures durability.

In summary, the JVC MX-GT70 stands out for its powerful audio performance, advanced technologies, and user-friendly features. With its impressive connectivity options and striking design, it not only meets the needs of audio enthusiasts but also enhances their overall music experience. Whether for casual listening or lively parties, the MX-GT70 delivers a high-quality sound that truly impresses.
Top Page Image Contents