JVC RX-558RBK manual Compu Link Remote Control System, Same time, Synchronized Recording

Page 26

English

COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver.

To use this remote control system, you need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see page 5).

•Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

CD player

Cassette deck

or

MD recorder

COMPU LINK – 3

(SYNCHRO)

Turntable

To connect the components, use the cables with monaural mini plug.

Automatic Power On/Off (Standby): only possible with the COMPU LINK-3 connection

Both the CD player and cassette deck (or MD recorder) turn on and off (standby) along with the receiver.

When you turn on the receiver, the CD player or cassette deck (or MD recorder) will turn on automatically, depending on which component has been previously selected.

When you turn off the receiver, both the CD player and cassette deck (or MD recorder) will turn off (standby).

Synchronized Recording

Synchronized recording means the cassette deck (or MD recorder) starts recording as soon as a CD or a record begins playing.

To use synchronized recording, follow these steps:

1.Put a tape in the cassette deck (or an MD in the MD recorder), and a disc in the CD player (or a record on the turntable).

2.Press the record (¦) button and the pause (8) button on the cassette deck (or MD recorder) at

the same time.

This puts the cassette deck (or MD recorder) into recording pause.

If you do not press the record (¦) button and pause (8) button at the same time, the synchronized recording feature will not operate.

Notes:

•If your audio component has two COMPU LINK-3 (SYNCHRO) jacks, you can use either one. If it has only one COMPU LINK-3 (SYNCHRO) jack, connect it so that it is the last item in the series of components. (For example, the turntable or CD player in the diagram above.)

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 11.)

•Refer also to the manuals supplied with your audio components.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 24 and 25.

Automatic Source Selection

When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or the remote control, the selected component begins playing immediately.

In both cases, the previously selected source continues playing without sound for a few seconds.

3. Press the play (3) button on the CD player or on the turntable.

The source changes on the receiver, and as soon as play starts, the cassette deck (or MD recorder) starts recording. When the play ends, the cassette deck (or MD recorder) enters recording pause, and stops about 4 seconds later.

Notes:

•During synchronized recording, the selected source cannot be changed.

•If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RX-558RBK Per I’ltalia Español Italiano Table of Contents Front Panel Remote ControlParts Identification To use the Cursor control buttons w on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM MW/LW Antenna ConnectionsConnecting the subwoofer speaker Connecting Other ComponentsConnecting the rear and center speakers Audio component connectionsVideo component connections If your audio components have a Compu LINK-3 terminalPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning the Power On and Off StandbyFrom the remote control On the front panelSelecting the Front Speakers Adjusting the VolumeMuting the Sound Recording a SourceAdjusting the Tone Attenuating the Input SignalAdjusting the Front Speaker Output Balance Reinforcing the BassChanging the Source Name Basic SettingsSetting Center and Rear Speakers for DSP Modes Using the Sleep Timer Storing the Basic Settings Adjustments One Touch OperationAdjust the sound using the functions listed to the left Press ONE Touch OperationReceiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Press FM Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations Appears on the displayPress PTY Search while To search for a program using the PTY codesSearching for a Program by PTY Codes Listening to an FM stationProgram type appears on Display Switching to a Broadcast Program Your Choice TemporarilyPress EON so that the last selected Press TA/NEWS/INFO untilSurround Modes Using the DSP Modes3D-PHONIC modes Dolby SurroundRear Speaker Available DSP Modes According to the Speaker ArrangementFront RearAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesOutput balance Press Rearl / + to adjustPress Test to check the speaker Rear speaker output levelPress Surround repeatedly Until the DSP mode you want Appears on the displayTo cancel the DSP mode Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingCD player Operating Other ComponentsSound control section Amplifier TunerDVD player Cassette deckMD recorder TV CH -/+Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0299HIMMDWJEM
Related manuals
Manual 32 pages 19.52 Kb

RX-558RBK specifications

The JVC RX-558RBK is a versatile and feature-rich audio receiver that caters to home theater enthusiasts and casual listeners alike. This receiver is designed to deliver impressive audio performance while providing a wide range of connectivity options and user-friendly features.

One of the standout characteristics of the JVC RX-558RBK is its power output, which can produce up to 100 watts per channel. This ample power ensures that your audio experiences, whether from movies, music, or gaming, are immersive and filled with vibrant sound. The receiver is equipped with a robust amplifier that offers clear and dynamic audio reproduction across various frequencies.

The RX-558RBK features multiple audio decoding technologies, including Dolby Digital and DTS, which allow for an enhanced surround sound experience. This makes it an excellent choice for creating a stunning home theater setup. The receiver supports various audio formats, providing flexibility for users who enjoy diverse content.

Connectivity options are abundant with the RX-558RBK. It comes with multiple HDMI inputs, allowing users to connect their Blu-ray players, gaming consoles, and streaming devices seamlessly. The HDMI ARC (Audio Return Channel) capability simplifies connectivity by allowing audio signals to be sent back to the receiver from a TV, eliminating the need for additional cables.

Another notable feature of the JVC RX-558RBK is its built-in FM/AM tuner, which enables users to enjoy their favorite radio stations with ease. The receiver includes digital presets for convenient access to preferred channels. Additionally, for those who prefer modern streaming options, the RX-558RBK is compatible with Bluetooth technology, allowing for wireless audio streaming from smartphones, tablets, and other devices.

User convenience is prioritized with the RX-558RBK, featuring an intuitive interface and a well-designed remote control. The on-screen display makes setup and navigation straightforward, minimizing the learning curve for new users.

In terms of build quality, the JVC RX-558RBK boasts a sleek design with a clean aesthetic that complements any home decor. It also incorporates protective circuit designs to ensure longevity and reliability.

In summary, the JVC RX-558RBK is a powerful, feature-packed audio receiver that combines advanced technologies, robust performance, and ease of use. Whether you are looking to enhance your movie watching or elevate your music listening experience, the RX-558RBK stands out as a solid option in the audio receiver market.
Top Page Image Contents