2.While another person lifts the back of the Frame (1), attach the Rear Stabilizer (28) to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33).
3.The Console (23) requires four “AA” batteries (not included); alkaline batteries are recommended. Press the tab on the battery door and remove it. Insert four batteries into the Console as shown. Make sure that the batteries are oriented as shown by the mark- ings on the battery door. Then, reattach the battery door.
2 |
|
33 | 28 |
| |
33 |
|
1 |
|
| 34 |
3 | Tab |
Battery | |
Door |
|
23 | Batteries |
|
4.Tip: Be careful to avoid pinching the console wire or the Upper Wire (44) during this step.
While another person holds the Console (23) near the Upright (2), connect the console wire to the Upper Wire (44). Insert the console wire and the Upper Wire into the Upright.
Next, attach the Console (23) to the Upright (2) with four M6 x 18mm Screws (43).
4
23
Console Wire
44
2
43
6