SET UP INSTRUCTIONS
Place the UX2 AIR BIKE in the area where it will be used. It is recommended that the UX2 AIR BIKE be placed on an equipment mat. The UX2 AIR BIKE is approximately 42 1/2" long x 22 1/4" wide x 45 1/4" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the UX2 AIR BIKE. Make sure that adequate space is available for access to and passage around the
UX2 AIR BIKE.
LEVELING: Use the LEVELING CAPS(48) on the FRONT STABILIZER(3) to level the UX2 AIR BIKE so there is no movement or rocking during your workout. Remove and reposition the LEVELING CAPS(48) so the flat side of both caps are in contact with the floor.
MOVING: To move the UX2 AIR BIKE, it is recommended that two people move the bike together.
Equipment Mat
FUNCTION INSPECTION:
Visually inspect the UX2 AIR BIKE to verify that assembly is as shown in the above illustration. Check the function of the UX2 AIR BIKE. Turn the crank slowly through one complete revolution to verify that the drive chain functions properly. Adjust the TENSION KNOB(27) and verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(77) on the UX2 AIR BIKE. Make sure that all users read the WARNING LABEL(77).
10