Stamina Products UX2 owner manual Assembly Instructions, Step

Page 6

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520or e-mail us at:

parts@staminaproducts.com

STEP 1

Insert REAR SUPPORT(2) into the MAIN FRAME(1) and fasten with ROUND HEAD SCREWS (M5x0.8x12mm)(57).

STEP 2

Attach FRONT STABILIZER(3) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x38mm)(51), ARC WASHERS(M8)(71), and ACORN NUTS(M8x1.25)(64).

STEP 3

Turn the LEVELING CAPS(48) on the FRONT STABILIZER(3) as needed until bike is steady and not rocking.

6

Image 6

Contents This Product is Produced Exclusively by Stamina ProductsTable of Contents Safety PrecautionsCall US First 800Following Tools are Included for Assembly Before YOU BeginAIR Bike Hardware Identification Chart Part No. and Description QtyAssembly Instructions StepSpeed Pickup WIRE23 HANDLEBAR6 Before Attaching Pedals and Connecting Linkages SET UP Instructions Function InspectionUX2 AIR Bike HOW to Install and Replace Batteries Operational Instructions Using the MonitorMode Button FunctionsOperational Instructions Seat Height Adjustment Load AdjustmentExercise Workout CONNECTOR75Operational Instructions Stationary HandlebarProblem Cause Correction MaintenanceTrouble Shooting Guide StorageAdjustment Instructions Chain AdjustmentFan Adjustment Tighten NUTS3/866 Conditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Do not BounceLimited Warranty WarrantyProduct Parts Drawing FrontBack Parts List DIAGRAM# Part Name QTYParts List FAX/MAIL Ordering Form Description