Viper Viper 315-00109 owner manual Assembly, Step

Page 7

Assembly

Getting Started - The Ironman Fitness Viper Recumbent Bike will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Make sure there is easy access to an electrical outlet. Before assembling, the unit should be placed as close as possible to its final location. If you are missing any parts, please call Ironman Fitness at 1-800-750-4766. Tools have been provided to assist with prod- uct assembly.

Figure 1

N8

N2

N3

Figure 1

Step 1:

Secure front stabilizer bar (B) to main frame (A1) using two bolts (N1), spring washers (N2) and two washers (N3).

Note: Bolts will already be installed onto the front stabilizer.

Figure 2

Figure 2

Step 1:

Secure rear stabilizer (C) to the main frame (A2) using bolts (N4), two spring washers (N2) and two washers (N3), already attached to stabilizer.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Customer Service 1.800.750.IRON Table of Contents Safety Precautions and Tips Important Safety InformationConsole Parts Identifier Instructions for AssemblyParts Identifier Step AssemblyAssembly N10 Assembly Assembly Congratulations Console Buttons Console InstructionsConsole Functions Buttons on Upright HandlebarManual Program General InformationGetting Started Program InstructionsUser Program ProgramsHeart Rate Program HRC Program Profiles Monitoring Your Heart Rate Monitoring Your Heart RateWarm Up Exercises General Instructions Moving Instructions Viper Recumbent Bike Parts List Rev B Parts ListView ExplodedResidential and Personal Use Limited Warranty Warranty Information
Top Page Image Contents