Sears NTEX04911.0 user manual Attach the Left Handlebar 7 in the same way

11.Identify the Right Handlebar (20), which is marked with a “Right” sticker, and orient it as shown.

Attach the Right Handlebar (20) to the Upright

(2) with two M8 x 16mm Screws (69).

Attach the Left Handlebar (7) in the same way.

12.Identify and orient the Rear Upright Cover (57) as shown.

Attach the Rear Upright Cover (57) to the Upright

(2) with an M4 x 16mm Screw (77).

11

69

7

2

69

20

12

57

77

2

13. Untie and discard the wire ties on the Main

Wire (43), the Frame Pulse Wire (42), and the 13 Receiver Wire (40).

While a second person holds the Console (4) near the Upright (2), connect the wires on the Console to the Main Wire (43), to the Frame Pulse Wire (42), and to the Receiver Wire (40).

Insert the excess wires into the Upright (2) or into the Console (4).

Tip: Start all the screws before tightening any of them. Also, avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (77).

4

43 2 77

42 40

Avoid pinching

the wires

11