Schwinn IC Pro / IC Elite, NS-754 manual Step #4, Materials & Tools / Initial Setup Adjustments

Page 5

step #4

MATERIALS & TOOLS / INITIAL SETUP ADJUSTMENTS

Ref. # Description

Qty

1

Frame

1

43

Pedals with Toe Clips & Straps (Left & Right)

1 Pair

Tools Required

 

Stamped Steel Combination Wrench

1

A. Remove Pedals (43) from the small parts box and look at the ends of the pedal threads. You will notice that each pedal is market with an "R" or an "L" on the very end of the spindle past the threads. This mark indicates which side of the bike the pedal is intended to mount. This is important since the thread directions are different for each pedal.

B.Locate the Pedal that has the "R" on the spindle. This pedal is for the right side crank arm of the bike (chain guard side) and is right hand threaded (turn clockwise to tighten). It is a good idea to apply grease to the threads before attaching them to the crank, this will assure that they can be removed in the future. Using the supplied Combination Wrench thread the right Pedal on to the crank arm, tighten firmly.

C.Locate the Pedal that has the "L" on the spindle. Follow the directions in step B. however, you will need to turn the spindle left (counter-clockwise) to tighten as the "L" spindle is reverse threaded.

Prior to first using the Schwinn IC bike it is a good idea to follow these initial set up steps.

A.Move bike into its final location. Confirm that all four feet are firmly in contact with the floor and that the bike is stable. If any of the feet are not making full contact it is recommended that you adjust them by turning the entire foot assembly counter-clockwise which will extend it further from the sta- bilizer bar. Once the foot is in full contact and the bike is stable, thread the jam nut clockwise until it comes into contact with the stabilizer at the point the foot assembly threads in. Tighten the jam nut snug using an adjustable wrench. This will secure the foot at the desired height.

B.With the resistance adjustment knob turned fully in the counter-clockwise position (no brake con- tact with flywheel) it is recommended that you soak the brake pads with Schwinn Fit-Tech Lube. This will extend the life of the brake pads and assure a smooth resistance interface with the fly- wheel.

C.Once the pads are lubricated it is recommended that you tighten the resistance adjustment knob clockwise to tighten the brake pads against the flywheel surface. Do this until the brake pads are firm- ly clamped against the flywheel. This will set the brake parts and give the springs some initial com- pression. This process will also assure that the Fit-Tech Lube penetrates the entire brake pad surface.

D.Confirm that the Saddle is positioned in the desired location on the saddle mounting bracket. If the angle of the saddle or the fore/aft position of the saddle needs to be adjusted, use the Combination Wrench to loosen the 14mm nuts on either side of the saddle mounting bracket. This will allow you to adjust the tilt angle and fore/aft position of the saddle. Once in the correct position, tighten both 14mm nuts on the saddle mounting bracket with the Combination Wrench.

That's it! Initial set up is complete and you can now enjoy all these features and quality of you new Scwhinn IC Bike!

NS-75

IC Pro / IC Elite 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 4NS-75 IC Pro / IC EliteSchwinn IC Bike Package Components List Step #1Step #2 NS-75Materials & Tools Front Rear Ref. # Description QtyStep #3 IC Pro / IC EliteStep #4 Materials & Tools / Initial Setup AdjustmentsPRO IC PRO Assembly Drawing and Replacement PartsTech Info Elite IC Elite Assembly Drawing and Replacement Parts
Related manuals
Manual 8 pages 50.84 Kb

IC Pro / IC Elite, NS-754 specifications

The Schwinn NS-754, IC Pro, and IC Elite stationary bikes have emerged as standout choices for fitness enthusiasts looking to enhance their indoor cycling experience. These sleek and durable models combine advanced technology, comfort, and performance, setting the bar high for home workout equipment.

The Schwinn NS-754 is equipped with a robust frame that supports intense workouts while remaining stable. Its adjustable seat and handlebars ensure a customized fit for users of different heights, promoting optimal riding posture. The ergonomically designed components cater to a seamless and enjoyable cycling experience.

One of the standout features of the IC Pro is its magnetic resistance system. This state-of-the-art technology allows riders to easily adjust the resistance level, enabling them to simulate a challenging outdoor cycling experience. With a wide range of resistance settings, users can tailor their workouts to suit their fitness levels, whether they are beginners or seasoned athletes.

In addition to its user-friendly design, the Schwinn IC Elite incorporates an LCD display that tracks essential workout metrics. This feature includes data on distance, time, calories burned, and heart rate, empowering users to monitor their progress and stay motivated. The integration of heart rate monitoring is a crucial characteristic, as it allows cyclists to stay within their target heart rate zones for optimal training effectiveness.

Comfort is also a priority with the Schwinn bikes. The IC Elite model includes a padded seat and adjustable handlebars to reduce strain during long rides. Additionally, both models come equipped with dual-sided pedals that accommodate various types of cycling shoes, offering versatility for users who prefer clip-in pedals or regular athletic shoes.

Durability is a hallmark of Schwinn products, and the NS-754, IC Pro, and IC Elite are no exception. Built with high-quality materials, these bikes are designed to withstand rigorous use over time, ensuring they remain reliable workout companions.

Together, the Schwinn NS-754, IC Pro, and IC Elite offer a perfect blend of innovation and practicality. Their advanced features, durable construction, and focus on user comfort make them excellent choices for anyone looking to enhance their at-home fitness routines.
Top Page Image Contents