Cisco Systems WEC600N manual Configuration, Wi-Fi Protected Setup, Chapter, Use the Push Button

Chapter 3

Configuration

Wi-Fi Protected Setup

If you connect to a router that supports Wi-Fi Protected Setup, then you will view this screen:

Select a Method

Before you begin, make sure the router and the computer with the Adapter are in the same room. Then select the method that is most convenient for you.

Push Button (Recommended)  Select this option to use the push button method.

Use Adapter’s PIN number  Select this option to enter the Adapter’s PIN number on the router.

Enter Key Manually  Select this option to manually enter the security key.

Click Next to continue, or click Back to return to the previous screen.

Proceed to the instructions for the method you selected.

Use the Push Button

1.Press the Wi-Fi Protected Setup button on the router.

2.Within two minutes, click the Wi‑Fi Protected Setup button on this screen.

Use the Push Button

Dual-Band Wireless-N ExpressCard

3. The Adapter connects to the network.

Connecting to the Network

4.Click Print to print out your wireless network settings. Then click Finish to return to the Status screen, or click Exit to exit the Monitor.

Congratulations

Congratulations! The Adapter is connected to

the network.

Enter the Adapter’s PIN Number

1.Access the web-based utility of the router. (Refer to the router’s documentation for instructions.)

2.On the router’s Wi-Fi Protected Setup screen, enter the Adapter’s PIN number in the PIN field. Then click Register.

16