![Create a New Profile](/images/new-backgrounds/113734/11373429x1.webp)
Chapter 3
Configuration
Export Select the profile you want to save in a different location, and click Export. Direct Windows to the appropriate folder, and click Save.
Delete Select the profile you want to delete and click Delete.
NOTE: If you want to export more than one profile, you must export them one at a time.
Create a New Profile
The next screen is the Available Wireless Networks screen.
Available Wireless Networks
This screen provides two options for setting up the Adapter.
Available Wireless Networks (For most users) Use this option if you already have a network set up. The networks available to this Adapter are listed on this screen. You can choose one of these networks and click Connect to connect to it. Click Refresh to update the Available Wireless Networks list.
Advanced Setup If your network is not listed on this screen, select Advanced Setup to set up the Adapter manually. This method is for advanced users only.
The setup for each option is described, step by step, under the appropriate heading on the following pages.
Available Wireless Networks
The available networks are listed in the table on the center of the screen byWireless Network Name. Select the wireless network you wish to connect to and click Connect. (If you do not see your network listed, click Refresh to bring the list up again.)
If the router does not support , proceed to the section,
No
If the router does not use
Wireless Security Disabled
If you connect to a network whose wireless security is disabled, then you will view this screen:
Click Connect Anyway
1.Click Connect Anyway.
2.Click Finish.
Congratulations
Congratulations! The Adapter is connected to
the network.
Wireless Security Enabled
If you connect to a network whose wireless security is enabled, then you will view one of three screens.
1.Proceed to the appropriate instructions.
WPA2
If the network uses WPA2 Personal security, then the
14 |