Chapter 3
Configuration
WEP Security
Passphrase Enter the Passphrase or WEP key.
The passphrase is
If you enter the network’s WEP key, enter the appropriate number of hexadecimal characters (“0” to “9” and “A” to “F”). For
To connect to the network, click Connect. To cancel the connection, click Cancel.
2. Click Finish.
Congratulations
Congratulations! The Adapter is connected to
the network.
Profiles
The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and wireless network names.
Profiles
Profile This is the name of the profile.
Wireless Network Name This is the SSID or unique name of the wireless network.
Profile Information
For each profile selected, the following are listed:
Wireless Mode This is the mode of the wireless network currently in use.
Standard Channel This is the channel used by your wireless network.
Security This is the status of the wireless security.
Authentication This is the authentication setting for the network.
IP Address This is the method used by the network to assign IP addresses.
Connect To connect to a wireless network using a specific profile, select the profile, and click Connect.
New Click New to create a new profile. See the next section, “Create a New Profile,” for instructions.
Edit Select the profile you want to change and click Edit.
Import Click Import to import a profile that is saved in another location. Select the appropriate file, and click Open.
13 |