Appendix B
Windows XP Wireless Zero Configuration
Appendix B:
Windows XP Wireless Zero
Configuration
Windows XP Wireless Zero Configuration
If your computer is running Windows XP, then this choice will be available. If you want to use Windows XP Wireless Zero Configuration to control the ExpressCard, instead of using the Wireless Network Monitor, then
NOTE: If you have WPA2 wireless security, refer to Update for Windows XP (KB893357) on the microsoft.com website to be able to connect correctly.
Wireless Network Monitor Icon
Use Windows XP Wireless Configuration
If you want to switch back to the Wireless Network Monitor,
Use Linksys Wireless Network Monitor
NOTE: For more information on Windows XP Wireless Zero Configuration, refer to Windows Help.
1.After installing the ExpressCard, the Windows XP Wireless Zero Configuration icon appears in your computer’s system tray.
Windows XP Wireless Zero Configuration Icon
2.The screen that appears will show any available wireless network. Select the network you want. Click Connect.
If your network does not have wireless security enabled, go to step 3.
If your network does have wireless security enabled, go to step 4.
NOTE: Steps 2 and 3 are for Windows XP with Service Pack 2 installed.
Available Wireless Network
3.If your network does not have wireless security enabled, click Connect Anyway to connect the ExpressCard to your network.
No Wireless Security
4.If your network uses WEP wireless security, enter the WEP Key in the Network Key and Confirm network key fields. If your network uses WPA Personal wireless security, enter the Passphrase in the Network Key and Confirm network key fields. Click Connect.
26 |
