Star Trac P-TBTX manual Install the Upper Body Arms

Using a 5 mm hex key, secure the display mounting bracket to the TOTAL BODY

TRAINER neck using four M6 X 70 socket head cap screws with lockwashers. TIGHT-

EN THE SCREWS SECURELY.

Step 2C

Plug the display cable connector into the socket on the display electronics board. Be sure the connector is oriented properly, and is fully seated in the socket.

Step 2D

Position the back cover on the display and secure with six #8 X 1/2” self-threading screws, using a #2 Phillips screwdriver. DO NOT OVERTIGHTEN THE COVER MOUNTING SCREWS.

Step 2E

Using a #2 Phillips screwdriver and one #10 X 1” screw, secure the bottom of the dis- play cover to the display mounting bracket.

Step 3B

3. Install the Upper Body Arms

Position the right-side upper body arm on the right-side hub, engaging the locating pin on the upper body arm with the un-threaded hole in the hub.

Step 4A

12 STAR TRAC TOTAL BODY TRAINER OWNER’S MANUAL