Specifications, Enclosure Cleaning | Cambridge SoundWorks MC650HD

SPECIFICATIONS

Warning About Excessive Amplifier Distortion:

Operating a receiver (of any power rating) beyond its maximum undistorted output level creates distortion – added high frequency sound not part of the musical program. Distortion dramatically increases the internal operating tem- perature of a speaker and will eventually cause the speak- er’s failure due to burned or melted internal parts. While Cambridge SoundWorks includes the most heat-tolerant parts commensurate with good acoustic design, the speaker’s Limited Warranty against defects in materials or workmanship does not apply to parts that fail from long-

term operation at very high temperatures.

Enclosure Cleaning

The speaker enclosures can be cleaned with a soft, damp cloth or mild cleaner.

Brush or vacuum the grille panels with a soft brush

attachment to your vacuum cleaner.

Specifications

Dimensions: 25-3/8" H x 7-1/8" W x 3-15/16" D

Weight: 14-1/2 pounds each

Impedance: nominal 8 ohms

Recommended amplifier power range: 20W – 100W RMS per channel.

Frequency Range: 80Hz – 24kHz.

Woofer Type: 4 x 3-1/2" with co-injection molded composite cones and butyl-rubber surrounds.

Tweeter Type: 1/2" aluminum dome with ferrofluid-damping and neodymium magnet.

Crossover: 2-1/2 way, series-connected with selectable wall-mounting compensation.

Enclosure: High-density pressure-cast aluminum with molded-composite baffle.

Appendix

® BRAND

AF6TM ALLIGATOR® Solid-Wall Anchors

1	1/4"

Drill 1/4" diameter hole — minimum hole depth 11/2". Insert anchor and tap flush.

Place item over anchor. Insert screw and tighten flush. For best results use screw gun for installation in solid walls.

In walls of minimum thickness 3/8", screw opens anchor and locks securely.

Patented under U.S. Patent Nos. 4,752,170 and 5,161,296; and foreign counterparts thereof. Other patents pending. TOGGLER and typeface, and ALLIGATOR are worldwide registered trademarks of Mechanical Plastics Corp.