Cambridge SoundWorks MC650HD manual To Attach the Wires

Page 5

TO ATTACH THE WIRES

1.Press the speaker’s red terminal to expose the hole in its shaft.

2.Insert the stripped end of one cable’s positive conductor into the speaker’s red (+) terminal.

3.Release the terminal to secure the connection. Make sure no stray strands of wire are present.

4.Repeat the procedure for the cable’s other conductor and the speaker’s black (–) terminal.

5.Connect the opposite end of the speaker cable to the speaker outputs of your receiver. Remember to observe channel and polarity (Left Positive, Left Negative, Right Positive, Right Negative).

6.Repeat the process for each speaker.

Image 5

Contents Page Introduction ContentsSpeaker Placement Preparing the wires Wiring the SpeakersTo Attach the Wires Hanging the speaker on the wall Speaker MountingSpeaker Mounting To place horizontally on a tabletop or shelf Horizontal PlacementAutomatic Tweeter Protection Setting Bass ContourEnclosure Cleaning SpecificationsSpecifications AppendixMultimedia speaker systems WarrantyWho may enforce the warranty P81-2190