Burley HP 4489 warranty Hardware Bag Contents and Tool List, II. Attaching the Wheels

I. Hardware Bag Contents and Tool List

IMPORTANT: Please verify that you have received all of the contents listed. Do not proceed with assembly if any parts are missing; contact Burley immediately for replacement parts.

Hardware Bag Contents

Rear reflectors:

(2) Reflector bracket

(2)Self-tapping Phillips screw, bracket

(2)Rear reflector, red

(2)Self-tapping slotted screw, reflector

Roll-bar hardware:

(2) Roll-bar knob

Tools Required: Phillips screwdriver Flat blade screwdriver

Envelope:

Burley Checklist

Warranty Card

Burley Nomad Owner’s Instruction & Safety Manual

NOTE: Alloy spoked wheels come with reflectors already installed.

II. Attaching the Wheels

First, verify that the tires are inflated to 30-35 P.S.I. Next, tip the trailer frame on its back end. If you are working on a rough or dirty surface, lay down a cloth or other protective barrier to avoid damage to your trailer. With the quick-release lever in the "OPEN" position, insert the wheel axle assembly completely into the hollow trailer axle, making sure that the horizontal shaft goes all the way into the axle.

NOTE: The spoked wheels install with the inset side of the hub facing outward.

Quick-release lever	Quick-release lever
in unlocked “OPEN”	in locked “CLOSED”
position	position

3

Burley Nomad Owner’s Instruction and Safety Manual