Install Tailgate and Splashguard
Snap the tailgate into place as shown in the illustration below. Start by ensuring there is sufficient slack in the 1”webbing to allow you to loop the webbing over the side panel and lock it into place in the corresponding side release buckle sewn to the inside of the side panel. Repeat for the other side of the tailgate. In a similar fashion, attach the front splashguard to the front side panels. The tailgate and splashguard are adjustable to accommodate any size or amount of cargo you wish to carry in your Nomad. Simply tighten or loosen the 1” webbing as required. For normal cargo carrying modes, the tailgate and splashguard should be adjusted so they are tight to minimize the entry of water and dirt.
Tailgate
Splashguard
7