WARNING
TRAILERSCANTIPOVER,CAUSINGDAMAGETOTRAILERAND SERIOUSINJURYTOPASSENGERS.AVOIDCAUSESOFTIPOVER, ESPECIALLY:
• CHILDREN LEANING OR BOUNCING
•HITTINGPOTHOLES,CURBS,OTHERROADOBSTRUCTIONS
•TAKING TURNS TOO FAST
•SUDDEN SWERVING
•IMPROPER WHEEL INSTALLATION OR TIRE INFLATION
Installing Tow Bar Clamps
1.On left front corner of trailer, match hole in left clamp to hole in tow bar mount and insert bolt from the top through holes.
2.Using hex key wrench on top and socket wrench on bottom, tighten nut securely on bolt end. Photo 1
3.Repeat process to install right clamp on right front corner.
Opening and Closing Your Trailer
1.Rotate front tube upward and rear tube back until they meet on plastic saddles. Figure 1
2.Rotate frame locks and snap onto rear tube. Figure 2
3.To close trailer, unclip seat buckles on back of seat and reverse opening process.
Note: To allow folding, the side battens in the d’lite ST trailer are not attached to the sides in the rear.
To view a video clip of “Folding a Burley” go to: www. burley.com/support/tutorials.cfm.
WARNING
CHECK THAT THE FRAME LOCKS ARE PROPERLY ENGAGED BEFOREUSINGTHETRAILER.FAILURETODOSOCANRESULTIN SERIOUS INJURY.
TowBarMount
Bolt
Button
TowBarClamp 
PHOTO 1: Left trailer side
Front
Rear
FIGURE 1
PlasticSaddles
FrameLocks
FIGURE 2
B U R L E Y D ’ L I T E S T A N D S O LO S T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L