Parameter | Settings | Description |
| (Bold=default) |
|
|
|
|
Video Length | 10S (second) | Sets length per captured video |
(only affects | default, with 60S | clip. Settings begin with 10 second |
video clips in | to5S possible | default when parameter is first |
Video or Hybrid | range | selected. After stepping down to |
modes) |
| 5S, video length settings start over |
|
| at 60S. |
|
|
|
Interval | 10S (second) | Selects the length of time that the |
| default, with a | camera will “wait” until it responds |
| 60M (minute) | to any additional triggers from the |
| to1S (second) | PIR after an animal is first detected |
| range of settings | and remains within the sensor’s |
| available. | range. During this user set “ignore |
|
| triggers” interval, the camera will not |
| capture photos/videos. This prevents | |
| in one minute | the card from filling up with too |
| increments, | many redundant images. Settings |
| begin with 10 second default when | |
| in one second | parameter is first selected. Note: after |
| increments) | setting down past “1S”, settings start |
|
| over at “60M”. |
|
|
|
19