The Trophy Cam supports 3 kinds of file system formats, FAT12, FAT16, and FAT32. The default value is FAT16 to save photos and videos. Here are some related notes:
•You don’t need to be concerned about the file system format of the Trophy Cam unless your equipment has problems reading the SD card. If this happens, please format the SD card with the Trophy Cam or in your computer first and then insert the card into your Trophy Cam and try again.
•The default file system format of the Trophy Cam is FAT16, which most computers can read. If you format an SD card for the Trophy Cam in your computer, you should choose the file system format FAT16. Normally FAT16 is recommended unless you have another image viewer that uses FAT12 or FAT32 format.
Deleting Photos or Videos
If you see a photo or video during playback on the LCD or video monitor that you want to delete, it can be done easily without leaving SETUP mode:
•Press the MENU key. You will see the first “Delete” screen, which lets you selects the option to delete only the currently displayed photo/ video, or all photos/videos (see below).
•Highlight the “Delete Current” or “Delete All” option, then press OK.
•Next, select “Yes” and press OK to erase only the last displayed photo or video (if you selected “Delete Current”), or every photo and video file on the card (if you selected “Delete
NOTE: after deleting a picture or a video file, the deleted files can’t be restored! It is also possible to delete all files from the card by using the Format parameter (see pg. 21).
29