Barnett Engineering RX150 warranty Correctincorrect

Page 11

Firing your Crossbow

To fire the arrow from your crossbow:

1.Point the crossbow in a safe direction and slide the safety forward.

2.The crossbow will now fire when the trigger is pulled. The safety MUST be disengaged prior to every shot.

BE SURE TO KEEP YOUR FINGERS BELOW THE FLIGHT TRACK WHILE SHOOTING.

CORRECTINCORRECT

CORRECTINCORRECT

This will prevent your hands from being struck by the string as it travels forward. The velocity of the string hitting your fingers will cause severe injury.

Adjustable Foregrip

To adjust the fore grip, simply loosen the screw on the bottom of the foregrip and slide fore grip to a comfortable position for you then tighten the screw.

Unloading your Crossbow

By far, the safest and only recommended way to un-cock your cocked crossbow is to load an arrow and fire it into a target or into the ground away from debris, loose rocks or other people.

11

Image 11
Contents RX150 Page Manual Contents Safety Guidelines For RX150 RX150 SpecificationsParts List for RX150 Nock Ends needs to be riveted Breakdown of Crossbow Parts for RX150Attaching the Foot Stirrup Assembly RX150 Installing Prod Assembly Arrow Selection and Proper Flight Installing Optional Scope Rear Sight for RX150 To Remove String Crossbow Operation Correctincorrect Troubleshooting String Fraying Care of String Care and MaintenanceWarranty Information Barnett International, Inc Warranty Card