Safety Guidelines For RX150 | Barnett Engineering guide

Safety Guidelines

For: RX150

The RX150 is equipped with an automatic safety, which engages every time the crossbow is cocked. The safety must be released before each shot. This, as with any other mechanical device does not guarantee total safety, as no safety device is a substitute for common sense and safe handling. NEVER pull the trigger on a crossbow when the safety is in the “safe” position or anywhere between “safe” and “fire”. Do not attempt to alter or modify the trigger mechanism, doing so will void your warranty and may cause personal injury to yourself or others.

The following rules should be followed at all times: EXTREME CAUTION SHOULD BE USED AT ALL TIMES WHEN HANDLING A CROSSBOW. FAILURE TO FOLLOW THESE RULES COULD RESULT IN SERIOUS INJURY OR DEATH.

!Always keep your fingers below the flight track and out of the path of the strings when firing the crossbow.

!Never dry-fire the crossbow (shoot without an arrow). Dry firing will void the warranty and result in damage to the limb, cable and string, possibly causing personal injury.

!Never fire the crossbow until you are sure of your target.

!Always use an adequate target and backstop when target shooting.

!Always use suitable crossbow arrows, such as Barnett's 16" 2117 or 2216 Aluminum Crossbow Arrows. Arrows of improper stiffness or mass weight may damage the limb and cable assembly, voiding the warranty and possibly cause personal injury.

!Always inspect the crossbow and arrows before firing. Bent or damaged arrows are not safe to fire and should be discarded or repaired.