Barnett Engineering RX150 warranty Care and Maintenance, Care of String

Page 14

CARE AND MAINTENANCE

Care of String

The owners kit contains a tube of lube wax that should be applied to the center serving and flight track every 5 – 10 shots. If the crossbow has been exposed to excessive moisture you may need to apply wax sooner.

Apply lubewax to the center serving of string, rolling string forwards and backwards to ensure even application of wax. Apply lubewax to the flight track in order to extend string life and reduce friction.

Keeping your Crossbow Peak Condition/Maintenance

Always store your crossbow in a safe, dry place.

Do not expose your crossbow to extreme heat, such as closed, hot vehicles or near heat sources.

Inspect string for signs of wear. String showing wear should be replaced immediately.

Periodically put a few drops of quality lightweight machine oil in the trigger mechanism.

Keep the flight track and the string serving waxed, reducing friction.

Your prod can be left strung indefinitely although we do not recommend that the bow be left in the cocked position for periods longer than four hours.

When storing the crossbow for a long period of time it is recommended that the prod be unstrung.

With reasonable care of your equipment and diligent practice, your Crossbow will remain an accurate, highly efficient hunting weapon.

14

Image 14
Contents RX150 Page Manual Contents Safety Guidelines For RX150 RX150 SpecificationsParts List for RX150 Breakdown of Crossbow Parts for RX150 Nock Ends needs to be rivetedRX150 Installing Prod Assembly Attaching the Foot Stirrup AssemblyArrow Selection and Proper Flight Installing Optional ScopeRear Sight for RX150 To Remove String Crossbow Operation Correctincorrect Troubleshooting String Fraying Care and Maintenance Care of StringWarranty Information Warranty Card Barnett International, Inc