Before YOU Begin, Assembly, Part Chart

BEFORE YOU BEGIN

Thank you for selecting the innovative SEARS LIFESTYLEFP CARDIO FORCE. The CARDIO FORCE offers a unique form of low-impactexercise that uses both the upper body and the lower body for increased cardiovascular benefits and greater toning results.

For your benefit, read this manual carefully before you use the CARDIO FORCE. If you have additional

questions, please call our toll-free HELPLINE at

1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number when calling. The model number is 831.287420. The serial number can be found on a decal attached to the CARDIO FORCE (see the front cover of this manual).

ASSEMBLY

Place all parts of the CARDIO FORCE in a cleared area and remove the packing materials. Do not dis- pose of the packing matedals until assembly is com- pleted. Read each step carefully before beginning.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:

•one phillips screwdriver

•one adjustable wrench

•one rubber mallet

•the included pedal tool (see the drawing below).

PART CHART

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part. The second number indicates the quantity needed for assembly. Note: Some small parts may have been pre- attached for shipping purposes. If a part is not found in the parts bag, check to see if it has been pre-attached.

3/4" x 2" Pedal Tool--1

1/2" Push Nut (30).--2 Note: Extra Push Nuts may have been included.

1/2" Dome Cap (29)--4Note: One extra Dome Cap may have been included.

3/8" x 2 7/8" Carriage Bolt (35)--4

#6 x 3/8" Screw (16)--2

3/8" Nylon Locknut (33)---4

1/4" x 2" Screw (17).--2