Body FAT

			20

		CE2.0 Crosstrainer
* 1	BODY FAT	This is a figure that is calculated from all the personal data you input and the signal transferred
		by putting your thumb on the sensor. The computer will use the signal and your personal data to
		figure out the fat percentage of your body.
* 2	BMI	Body Mass Index: This value is calculated from your weight and height and indicates if you are

overweight.

All the BMI & BODY FAT advice figures are supposed to be a basic guide to help you lead a healthy lifestyle, they are not for intended for medical purposes.

Note

1.When the computer does not receive a signal for 4 minutes, the LCD display will shut off automatically and all previous training data will be stored. You may press any button to restart the computer.

2.The monitor can store 4 user’s (U1-U4) preset function data. When the monitor is turned on it will show the previous (before the power was turned off) user’s identification. If previous user is U1, U2, U3 or U4, the previous settings for Time, Distance, Calories, Watt (if training in manual mode), or Pulse values, if previous user is U5 to U9, the LCD will display user’s identification only.

3.The monitor will display the same information as mention prior in point 2 if you press and hold the RESET button for 4 seconds.

4.If the LCD display is incorrect, please remove the batteries and reinstall.

5.The monitor can be turned on with AC adaptor input.

6.Body fat advice and symbol indication table

CE2.0 Crosstrainer

figure out the fat percentage of your body.

BMI