10
CE2.0 Crosstrainer
ASSEMBLY INSTRUCTIONS
First remove the bolts (B21), spring washers (B14) and washers (B13) from the central support tube (B)
Step 1 Connect the cable (B5) & (A15)
Step 2 Assemble the central support tube (B) onto the main frame (A) with bolts (B21), spring washers (B14) and washers (B13)
Attention:
When pushing the tubes together make sure not to pinch cables.
Remove the screws (E4) from the back of the monitor (E). Connect the sensor wire (B5 & B6) with monitor wires and put the monitor on the fixing plate.
www.smoothfitness.co.uk