Stamina Products 1725 owner manual Assembly Instructions

Page 11

ASSEMBLY INSTRUCTIONS

STEP 10

Install four AA batteries into the METER(33). Four batteries are included. See page 14 for detailed battery installation instructions. Connect the SENSOR CONNECTION WIRE(34) and the CONTROL WIRE(98) to the EXTENSION WIRES on the METER(33). Push the excess wires back into the UPRIGHT(6). Attach the METER(33) to the plate on the UPRIGHT(6) with ROUND HEAD SCREWS(M5x0.8x15mm)(77).

CAUTION: Be careful not to damage the WIRES(34, 98) when attaching the METER(33).

Image 11

Contents 2040 N. Alliance, Springfield, MO This Product is Produced Exclusively byStamina Products Table of Contents Safety Instructions800 Call US FirstWrench Allen Wrench 6mm Before YOU BeginCross Trainer 1725 Elliptical Left HandlebarEquipment Warning & Notice Labels 100 110 120 130 140 150 Part No. and Description QtyStep Assembly InstructionsAssembly Instructions ARM5 UPRIGHT6 Assembly Instructions Function Inspection SET UP InstructionsMETER33 Operational Instruction Load AdjustmentExercise Workout Function Buttons Using the Fitness Monitor or MeterHOW to Install and Replace Batteries Operational InstructionsStorage MaintenanceTarget Heart Rate Zone Estimated by Age Conditioning GuidelinesDo not Bounce WARM-UP and COOL-DOWNFront Product Parts DrawingPart Name Parts ListPart Name QTY Warranty Limited WarrantyPage Stamina Products, Inc Box Springfield, MO Rear Unit AssemblyFAX/MAIL Ordering Form