Stamina Products 15-4545 owner manual Seat FRAME5

Page 8

ASSEMBLY INSTRUCTIONS

B.

A.

(Assembled

 

at the factory)

 

NOTE: Be careful not to damage the WIRES(38, 39, and 40) when attaching the HANDRAIL(6) and the

SEAT FRAME(5).

STEP 4

Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75).

STEP 5

Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock in position with the ADJUSTMENT KNOB(50). Attach the STOPPERS(51) to the top end of the REAR FRAME(3) with HEX BOLT(M8x1.25x80mm)(60) and NUT(M8x1.25)(72). Also, please verify that the other STOPPERS(51) are assembled at the factory.

8

Image 8
Contents This Product is Produced Exclusively by Stamina ProductsSafety Instructions Table of ContentsCall US First 800Before YOU Begin Magnetic Fusion 4545 BikeEquipment Warning & Notice Labels Hardware Identification Chart Part No. and Description QtyAssembly Instructions StepSeat FRAME5 Assembly Instructions Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Seat Adjustment Load AdjustmentOperational Instructions Using the Fitness Monitor or Meter Mode ButtonHOW to Install and Replace Batteries FunctionsMaintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Suggested Stretching Exercises Lower Body StretchLimited Warranty WarrantyProduct Parts Drawing FrontParts List Part NameParts List Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO