ASSEMBLY INSTRUCTIONS
STEP 6
Refer to the inset drawing. Plug the LEFT and RIGHT PULSE SENSOR WIRES(39, 40) into the REAR EXTENSION WIRE(38) located on the REAR FRAME(3). Push the plugs, only the plugs, back into the opening in the REAR FRAME(3). Press the SQUARE PLUG(46) into the slot in the back of the REAR FRAME(3) allowing the LEFT and RIGHT PULSE SENSOR WIRES(39, 40) to feed through the opening created in the slot below the SQUARE PLUG(46). Please note that the slot is bigger than the SQUARE PLUG(46) to allow room for the wires.
STEP 7
Attach the SEAT(47) to the SEAT FRAME(5) with ROUND HEAD BOLTS(M6x1x15mm)(61). Attach the BACK CUSHION(48) to the SEAT FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x40mm)(58).
9