Stamina Products 55-1630 owner manual Assembly Instructions

Page 10

ASSEMBLY INSTRUCTIONS

STEP 12

There is an "L" decal on the LEFT HANDLEBAR(81), and an "R" decal on the RIGHT HANDLEBAR(82). Attach the LEFT and RIGHT HANDLEBARS(81, 82) onto the PIVOTING ARMS(79) with HEX BOLTS (M6 x 35mm)(74), ARC WASHERS(M6)(71), LOCK WASHERS(M6)(72), and ACORN NUTS(M6)(73).

STEP 13

Lubricate the HANDLEBARS(81, 82) with a small amount of liquid soap, then slide the two FOAM GRIPS(83) onto the HANDLEBARS(81, 82).

STEP 14

Install an AAA battery into the METER(22). See page 12 for detailed battery installation instructions. Connect the SENSOR WIRE(23) to the METER(22). Slide the METER(22) onto the bracket on the UPRIGHT(6). CAUTION: Be careful not to damage the SENSOR WIRE(23) when sliding the METER(22).

Image 10

Contents Owners Manual Table of Contents Safety InstructionsCall US First Before YOU Begin SpaceMate E300Hardware Identification Chart Assembly Instructions BackARM5 Metal Fitting Look down from the top Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Using the Electronic Meter Function ButtonOperational Instructions Load Adjustment Exercise WorkoutMaintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Warranty Product Parts Drawing DIAGRAM# Part Name QTYDIAGRAM# Part Name Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO