Removal & Replacement | 600 |
Remove Crank
Tools Required:
Crank Puller
Crescent Wrench
Block of wood
Step 1.
Place block of wood under moving Arm assembly to prebvent counter- clockwise rotation. Note position of block of wood to the left of the tray.
Step 2.
Place 15mm socket end of crank Puller over axle nut. Loosen the axle Nut by turning the crank puller counter- Clockwise with a crescent wrench.
Step 1. Wood Block Placement. Step 2. Axel Nut Removal.
Step 3.
Remove crank assembly from hub.
Step 3. Remove Crank Assembly from Hub.
Copyright 2001 True Fitness Technology, Inc. | Page 37 |