Vision Fitness X6200HRT/DA, X6000DA manual E P 1 O R a N G E B a G

Page 5

S T E P 1 O R A N G E B A G

•Install the left and right stabilizers with the four bolts (M8 x 16MM), using the Blue 5MM Allen wrench.

•Cover both stabilizers with the included rubber covers.

•Insert the rear folding axle shaft into the rear tube.

S T E P 2

B L U E B A G

•Slide a wavy washer (M16) onto the right-hand side of the rear folding axle, followed by the right-hand pedal arm guide rail (the guide rails each have a blue indicator arrow printed on their sides; these arrows should face to the outside).

•Slide a flat washer (M16) onto the right-hand side of the rear axle, followed by a rear wheel.

•Slide the large flat washer (M8) onto the right-hand side of the rear axle, and secure with a bolt (M8 x 16MM).

•Repeat above steps to install left- hand pedal arm guide rail.

•X6200HRT/DA only: Slide the toe- piece onto the pedal arm while simultaneously lifting the locking knob. Lock the toe-piece into place at the STEP or GLIDE position.

S T E P 1

S T E P 2

X 6 2 0 0 H RT / D A

O n l y

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents S e m b l y G u i d e Dual-action elliptical trainers PA RT S B O A C K B a G E E N B a GB L U E B a GE P 1 O R a N G E B a G N K B a G E P 4 G R E E N B a G East Lake Street P.O. Box 280 Lake Mills. WI E P 5 B L a C K B a G
Top Page Image Contents