JVC CA-MXJ700, GVT0030-003A manual Using the Timers, Using Daily Timer

Page 26

English

Using the Timers

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

on-time comes (the indicator flashes just before the on- time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

When using a CD as the source to play, make sure there is a CD on the selected disc number tray.

When using a tape as the source to play —

Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

Make sure that the tape direction is correct.

When using the external component as the source to play, set the timer equipped with the external component at the same time.

On the unit ONLY:

1 Press CLOCK/TIMER until “DAILY” appears on the display.

The DAILY (Daily Timer) indicator also starts flashing on the display.

Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Canceled Clock ON TIME setting

(See page 9.)

2 Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the unit enters on-time setting mode.

3 Set the on-time you want the unit to turn on.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute,

then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute,

then press SET.

The unit enters source selecting mode.

5 Press 4or ¢to select the source to play, then press SET.

• Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

AUX

 

TAPE

 

– CD – –

 

 

TUNER FM: tunes into a specified preset

FM station. = go to step 6.

TUNER AM: tunes into a specified preset AM station.

=go to step 6.

– CD – : plays a disc from a specified track of a specified disc. =go to step 6.

TAPE: plays a tape in deck A or B. = go to step 7.

AUX: plays an external source. = go to step 7.

– 21 –

Image 26
Contents CA-MXJ700 Precaución -- Interruptor Precaución CA-MXJ700 Class Laser Product About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Powered Rolling Panel Display WindowRemote Control Remote ControlUnpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna For better reception of both FM and AMRelease the finger from the clamp Connecting Other EquipmentAdjusting the Voltage Selector Press and hold Demo for more than 2 secondsSetting the AM Tuner Interval Spacing Turning On and Off the PowerSetting the Clock Common OperationsReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sound ModesSurround modes Creating Your Own Sound Mode Manual ModeTo use your own sound mode SEA Sound Effect Amplifier modesTuning in a Preset Station Tuning in a StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back the Entire Discs Continuous Play Playing Back CDsLoading CDs Basic CD OperationsPress CD £·8 Program PlayProgram other tracks you want Repeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play Prohibiting Disc Ejection Tray LockLocating the Beginning of a Song Music Scan Playing Back TapesPlaying Back a Tape Recording a Tape on Deck B To record on both sides Reverse ModeRecording To record an AM station Beat Cut Dubbing TapesPress Dubbing To stop during dubbing, pressPress Edit Auto Edit RecordingOn the unit only Load CDs Press SETUsing the Microphones Singing AlongUsing the Timers Using Daily TimerWhen selecting Tuner FM or Tuner AM Using Recording TimerWhen selecting CD Press 4or ¢to set the volume levelUsing Sleep Timer Timer PriorityHandling discs MaintenanceTo clean the disc Handling cassette tapesTroubleshooting SymptomSpecifications JVC 0200MWMMDWJEM

GVT0030-003A, CA-MXJ700 specifications

The JVC GVT0030-003A and CA-MXJ700 are two highly regarded components in the audio equipment realm, well-known for their impressive performance, rich features, and advanced technologies that elevate the listening experience.

The JVC GVT0030-003A is a versatile speaker unit designed to produce clear and powerful sound. With its innovative design, this speaker is engineered to deliver an immersive audio experience, making it suitable for both casual listening and more demanding soundtracks. This model features a robust woofer that is capable of reproducing deep bass tones, ensuring listeners can enjoy a wide range of music genres without missing a beat. The high-frequency drivers are finely tuned to provide crisp and clear treble, enhancing overall audio clarity.

On the other hand, the CA-MXJ700 is a compact mini audio system that stands out due to its multi-functional capabilities. This system offers a variety of playback options including CD, USB, and Bluetooth, allowing users to enjoy their favorite music from different sources seamlessly. One of the standout features of the CA-MXJ700 is its Bluetooth connectivity, which enables easy pairing with smartphones, tablets, and other Bluetooth-enabled devices, making it convenient to stream music wirelessly.

The CA-MXJ700 also boasts a built-in FM tuner, allowing users to enjoy their favorite radio stations, and the option for auxiliary input expands its compatibility with other audio devices. An integrated digital amplifier drives the system’s output, ensuring that audio remains undistorted even at higher volumes.

Both the GVT0030-003A and CA-MXJ700 are designed with user-friendliness in mind. The systems come equipped with intuitive control panels and remote control options, allowing for effortless operation from a distance.

In conclusion, the JVC GVT0030-003A and CA-MXJ700 deliver a powerful combination of advanced features and state-of-the-art technologies. With their ability to produce high-quality audio and options for versatile playback, these products are ideal for anyone looking to elevate their music listening experience at home or on the go. Both components reflect JVC's commitment to audio excellence, catering to the needs of audiophiles and casual listeners alike.