Getting to Know Your Wireless Router 3
Router Front Panel
The wireless-N modem router front panel shown below contains status LEDs.
You can use the LEDs to verify status and connections. The following table lists and describes
each LED and button on the front panel of the wireless-N modem router.
Figure 2
Table1. LED and Front Panel Button Descriptions
LED LED Activity Description
Power Solid green Solid green. Power is supplied to the router.
Solid Red POST (Power-On Self-Test) failure or device malfunction
Off Power is not supplied to the router
Factory Reset Lights momentarily when the Restore Factory Settings button is
pressed for 6 seconds, then blinks red three times when released. It
then turns green as the gateway resets to the factory defaults.
LAN Ports
1 - 4 Solid green The Local port has detected an Ethernet link with a device.
Blinking green Data is being transmitted or received.
Off No link is detected on this port.
Power LAN Ports (1-4) USB DSL Wireless WPSInternet