Technical Specifications 36
Default Configuration

You can use the Restore Factory Settings button located on the bottom of your router to reset all

settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold

the Restore Factory Settings button for 6 seconds. Your router will return to the factory

configuration settings that are shown in the table below.

Feature Default Behavior
Router Login
User login URL http://www.routerlogin.net or http://www.routerlogin.com
User name (case sensitive) admin
Login password (case sensitive) password
Internet Connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed AutoSense
Local Network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168 .0 .254
DMZ Disabled
Time zone GMT-8 for NA version, GMT for WW version, GMT + 1 for
Annex B German version
Time zone adjusted for daylight saving
time Disabled